- What color LED light is best for kitchen?
- Where should you put lights in a room?
- How far from the wall should recessed lights be?
- How many lights do I need for my room calculator?
- How many LED lights do I need in a room?
- How many lumens is a 30×40 shop?
- How do you measure a room for LED strip lights?
- How many lumens should a bedroom have?
- How many down lights do you need in a room?
- Is 3000 lumens too bright?
- How do you calculate how many LED recessed lights are needed?

## What color LED light is best for kitchen?

These bulbs are best suited for kitchens and bathrooms.

Bright white (4,000 to 5,000 Kelvin) is between white and blue tones.

With a less cozy and more energetic feel, bulbs with this color range are best for work spaces (such as a home office or garage) and kitchens with chrome fixtures..

## Where should you put lights in a room?

“Ideally, lights should be below your eye level,” says Adelman. “Set up task lights under the stove range or cabinets to light countertops.” In living rooms, use a combination of floor lamps, table lamps, and down-lights (recessed or track lighting). “Here the lighting should be part of the decor,” says Galuppi.

## How far from the wall should recessed lights be?

between 1.5 and 3 feetKeep your fixtures between 1.5 and 3 feet away from the wall. Space fixtures equidistant from each other. Place adjustable trim away from the wall. Place fixed trim close to the wall.

## How many lights do I need for my room calculator?

To estimate the number of lumens your space will need, just multiply the square footage of your room by the number of foot-candles required for the space. For example, for a bathroom that is 64 square feet with a foot-candles range of 70-80, you’ll need from 70×64 to 80×64 lumens, or 4480 – 5120 lumens.

## How many LED lights do I need in a room?

For the average living room of 250 square feet, you’ll need 5,000 lumens as your primary light source (20 lumens x 250 square feet), equivalent to about five 100 watt incandescent light bulbs, five 23 watt CFLs, or eight 10 watt LED light bulbs.

## How many lumens is a 30×40 shop?

I’ve done some research and from the formulas I’ve seen, for a 30×40 shop to have 100 lumens per sq/ft (optimum)….

## How do you measure a room for LED strip lights?

Use a measuring tape to measure your intended lit space, writing down the measurements so you don’t forget them. For example, if you’re putting the light strip along the perimeter of a room that has 4 walls that are 12 ft (3.7 m) in width, you would need a strip of lights that’s at least 48 ft (15 m) long.

## How many lumens should a bedroom have?

Dining room: 3,000 to 4,000 lumens. Living room: 1,000 to 2,000 lumens. Bedroom: 1,000 to 2,000 lumens.

## How many down lights do you need in a room?

A general rule of thumb for spacing your downlights is to take the height of your ceiling and divide by 2. For example, if your ceiling is 8 feet high, then your downlights should be around 4 feet apart from each other. It is important to consider that this is only a very general rule and should be used with caution.

## Is 3000 lumens too bright?

A foot-candle is a measure of how bright the light will be when you are a foot away from the light source. … 30-40 foot candles are around 3,000-4,000 lumens. In other words, 3,000 lumens is meant to give a room a brighter light. This is not ideal if you have a small room and it’s a bedroom.

## How do you calculate how many LED recessed lights are needed?

Formula: total sq. footage x 1.5 = total wattage needed. Total wattage divided by 60 watts (or whichever wattage you need) = total amount of recessed can lights. Example: 240 square foot room x 1.5 = 360 divided by 60 (the bulb wattage I’d like to use) = 6 recessed lights needed.