Can I Put LED Lights In A Fluorescent Fixture?

Can you put LED lights in old fixtures?

LEDs can be used in any light fixture, as long as it’s not enclosed or air-tight, and is not an old-style dimmer system.

Both these will shorten the lifespan of LED bulbs..

Are LED lights brighter than fluorescent?

The LED tube lights are noticeably brighter than fluorescent tubes and you don’t get exposed to any kind of harmful rays such as UV/IV rays as well that can damage your eyes and can result in skin allergies as well.

Can you use a 100 watt equivalent LED bulb in a 60w fixture?

However, LED’s do not emit dangerous levels of heat. Thus, if your fixture says “not to exceed 60-Watts” but you want to use a 100-Watt equivalent LED bulb, this would be safe to do so. … For a 60-Watt fixture, you could use a 100W, 125W, or even 150W LED equivalent because they all consume under 60-Watts!

What happens if you put a 60w LED bulb in a 40w socket?

If you use a plastic socket and a traditional bulb larger than 60w the chance for heat to be created and melt the socket causing fire was very real. … The heat created should not be enough to heat up the socket. I would say yes, it is OK to replace the 40w bulb with a 60w bulb using only 11w.

Do I need to remove the ballast to use an LED bulb?

LED technology does not require a ballast to regulate the amount of energy flowing to the lights. … Additionally, removing the ballast will reduce energy usage and result in even great cost-savings as ballasts continue to draw more power than necessary.

Can you replace 4 foot fluorescent bulb with LED?

There is a wide variety of methods for converting to LED tubes. The simplest is to completely replace old fluorescent fixtures with brand-new LED fixtures. However, LED fixtures to replace four-bulb (8-foot-long) fluorescent fixtures (common in farm buildings) can set you back $100 or more per unit.

Can I use a LED bulb in a mercury vapor fixture?

You are still allowed to use mercury vapor lamps and ballasts, although you can’t purchase any replacement parts. However, efficiency and lack of governmental support aren’t the only disadvantages to these lights. They contain mercury, which complicates disposal.

Can I replace my fluorescent tubes with LED?

Yes, you can replace fluorescent tubes with LED tubes or LED integrated fixtures. … As long as the bulb is compatible with the existing fluorescent ballast in the fixture, you simply remove the fluorescent and replace it with the LED tube light.

Are t8 and t12 sockets the same?

T8 tubes are simply 1 inch in diameter versus the 1.5 inch diameter of T12 tubes. In an effort to make LED tube lights compatible with the internal dimensions of most fixtures, you will find that most LED tube lights feature a T8 or 1 inch diameter. They can indeed be used in T12 fixtures.

What happens if you put an LED bulb in an enclosed fixture?

Using an LED bulb in an enclosed fixture when it isn’t designed for that may cause the bulb to overheat, potentially causing damage to the light bulb and fixture. Even a little extra heat can shorten the lifespan of the bulb and keep you from enjoying the full value of your investment.